Wednesday to Saturday, June 26 to 29, 2019 (Thunderbird RV Park, Campbell River, BC)

It's hard to believe that it was 9 years ago this morning that we were up early and at the ferry terminal for the 8:00 sailing...and starting our new lifestyle! We've met so many wonderful people that are now lifelong friends, and seen so many fabulous places in these 9 years....we look forward to many more years!
The day started off cloudy and rainy but by late morning the sun was out and it had turned into a beautiful, warm day.

Steve here...I decided to go to CR Springs to see if they had leaf spring clamps that I could mount over the bands to prevent the leafs from twisting. If you recall a year ago last fall on our trip south we did a complete suspension replacement. Well last fall one of our leaf springs failed. The leaf spring band was missing and the leafs had twisted bending the longest one almost puncturing a tire. The guy at CR Springs said the band isn't there to stop the leafs from twisting...
The steel band is called the rebound clip. Their main purpose is to help keep the main leaf from breaking on a rebound. When the weight of a vehicle or trailer is on the spring, all of the leaves work together to support the spring above them. If the wheel drops for any reason the total weight of the axle falls on the main leaf if there are no rebound clips. The clip also keeps the leaves neatly stacked.
He said loose nuts on the suspension u-clamps will cause this. So I returned and grabbed my tools and crawled underneath to check them out. I found that the newest leaf spring was starting to twist so I hammered it back into place and flattened the band back down. I found 3 of the 4 nuts were loose and one was so loose I could spin it with my fingers!! On another leaf spring, 3 of the 4 nuts were also loose but the springs were straight. Why didn't anybody tell me to re-torque those nuts!
While Steve was doing that, I was busy on a project of my own...updating all of the photos in our picture collage frames.

With the work done, we went out for a bike ride, the water was very calm with no wind and a slack tide...

This appeared on our ride to the end of the spit...after being here a month and riding our bikes down here so much, I don't think we could have missed it! So either we're blind or it has just been placed here. Made out of driftwood...very cool!
...and that was pretty much our day!

We woke to sun Thursday (June 27) morning,but we knew it wasn't going to last...rain is in the forecast for today. And sure enough, we started hearing the pitter-patter of raindrops shortly after 10:30.

The rest of the day was dark, windy and rainy. So needless to say, we had an inside day...watching TV and work on a blog update.

Friday (June 28) was basically a repeat of Thursday. As we sat with our morning coffee, we listened to the heavy downpour of rain on the roof. Wow, we haven't had a downpour like that for a long time but it's badly needed.

The only difference between yesterday and today was laundry...yes, it was laundry day, so Steve helped me take 3 bags down to the laundry room. And that's where I spent the next couple of hours. At least the timing was right...we managed to get back and forth between the trailer and laundry room during a reprieve from the rain showers.

Saturday (June 29) and our last day here...wow, that was a fast month! Steve wanted to wash the truck, so we took it to the car wash at the Shell Station...and Buster got all the dust rinsed off...
We saw this old Dodge motorhome on our way home...we each waved and gave each other a honk with our air horns...
At the next traffic light they pulled up beside us...
Steve did some pack up outside in prep for leaving tomorrow while I did the same inside. With that done, we went for a bike ride...we're sure going to miss this area! It's great for bike riding and so close to shopping and restaurants, not to mention the beehive of activity on the estuary and Discovery Passage!

At 4:00 we hopped on our bikes again and rode to the Riptide Pub for drinks and dinner...one last visit to one of our favourite spots here in Campbell River! Ray and Anne joined us and we enjoyed good company and good food!
 A barge loaded with logs went by...
Well, that brings our month's stay here in Campbell River to an end. We have really enjoyed our stay and will definitely be back should we spend the summer on Vancouver Island again.


10 comments:

  1. It was great catching up with you in Campbell River. Now onto your next adventure. :)

    ReplyDelete
  2. Good information about the springs. Thanks for sharing that.

    ReplyDelete
    Replies
    1. Even after 9 years on the road I'm still learning things!

      Delete
  3. Awesome driftwood art. Guess where (my) Steve will be today with a torque wrench?! It’s nice to get the truck washed even if it only lasts a few days. They get so grubby!

    ReplyDelete
    Replies
    1. Hope Steve doesn't find as many loose nuts as I did!

      Delete
  4. Excellent leaf spring lesson! I learned something new today! What are the torque specs on the springs, Steve?

    ReplyDelete
  5. That driftwood sculpture was very cool! I wish there were more of those large car washes around those certainly are nice for washing rigs.

    ReplyDelete
    Replies
    1. Just wish this car wash allowed bucket washing. It would have cost us a fortune so Buster just got a $4 rinse to get rid of the logging road dust.

      Delete